The guide
Task-first pages, straight from the app's own Guide · each one is a sheet in the register
Every page starts from a job you actually have — patch a node, calibrate a printer, publish the book — and walks it in the app's own order. The same material ships inside netmap under Guide.
Start your first show
Load the demo, read how the tabs connect, export the book, then open a blank title block of your own.
Draw rack elevations in 2D & 3D
Devices with a Rack and an RU become to-scale elevations — front, rear, 3D flight cases, containers.
Plan the IP scheme & VLANs
One VLAN legend rules the book — colors, subnets and IP starts that drive the planner and the audits.
Import an MVR plot
Pull the plot straight from Vectorworks — fixtures, universes by position, conflict checks, GDTF footprints.
Build looms & stamp them in
A stock loom library: spec it once, stamp both ends, every leg lands in the cable schedule. Free for all tiers.
Print cable labels
Lightwright-style labels on die-cut stock — Avery + OnlineLabels presets, VLAN color bars, printer calibration.
Publish the book to the crew
The whole book at netmap.show/publish/you/show — PIN optional, 3D orbit, no install, and the crew works from it.
Take guest sign-ups
Reserve IPs, universe chunks and dry lines for visiting LDs, print the handoff chart, and let them sign themselves up.
Map the venue & measure fiber
Drop the venue drawing in, set the scale, route the fiber the way it really runs. Every trunk gets a measured length.
Draw a rack's internal wiring
A ConnectCAD-style wiring diagram per rack, drawn from the cables and ports you already entered. Nothing new to maintain.
Cloud backup & two machines
Every save lands in your account. Open the same show on the studio machine and the tour laptop, and let netmap tell you when one of them moved it.